Fluorescent Dye

Cat.No.	Name	Information
M5708	Iohexol	Iohexol is a contrast agent which can be applied for myelography, computerized tomography (cisternography, ventriculography) and MicroCT imaging in vivo.
M5118	Nile Red	Nile Red is a strongly fluorescent stain in the presence of a hydrophobic environment for the detection of intracellular lipid droplets. Nile red exhibits strong fluorescence in non-polar environments, while its fluorescence is weaker in hydrophilic polar environments. Nile red is commonly employed as a specific fluorescent dye for lipids and lipid droplets. The fluorescence excitation and emission wavelengths of Nile red are 559/635 nm respectively.
M5106	DAPI dihydrochloride	DAPI dihydrochloride is A fluorescent dye that binds DNA rich in a-T sequences. The maximum excitation/emission wavelength is 358nm/461 nm, and the blue fluorescence is often used to observe the nucleus and nucleic acid. Store at room temperature away from light.
M9096	H2DCFDA	H2DCFDA is a cell-permeable probe used to detect intracellular reactive oxygen species (ROS) (Ex/Em=488/525 nm). H2DCFDA can be used for the Bacterial reactive oxygen species (ROS) production assay.
M9724	JC-1	Jc-1 (Mitochondrial membrane potential probe) is a fluorescent lipophilic carbonyl cyanine dye used to measure mitochondrial membrane potential. The maximum excitation/emission wavelength is 515nm/529nm (590nm), and green fluorescence is emitted. Used to observe mitochondria, stored at room temperature, away from light.
M8873	D-Luciferin potassium salt (Ultra pure)	D-Luciferin potassium salt is the natural specific substrate for firefly luciferase (FLuc) and one of the most commonly used dyes in bioluminescence and in vivo imaging experiments. D-Luciferin potassium salt is catalysed by FLuc into luciferin in the presence of ATP, magnesium ions, and oxygen, emitting fluorescence with a peak wavelength of approximately 560 nm. In experiments, by integrating the FLuc gene as a reporter element into target cells (such as tumour cells, stem cells, or pathogenic microorganisms) or transgenic animals, followed by intraperitoneal or intravenous injection of D-luciferin potassium salt, real-time, non-invasive tracking and quantitative analysis of these targets can be achieved using imaging equipment.
M5114	Calcein-AM	Calcein-am is a fluorescent dye that penetrates cells and is used to measure cell viability. The excitation and emission wavelengths of Calcein are 494 nm and 517 nm, respectively. Fluorescent green. Store at -20℃ away from light.
M5115	Fluorescein diacetate	Fluorescein diacetate (FDA), a fluorescent probe used for vital staining, is a fluorescently activated by esterolytic activity of human Pi-class glutathione S-transferase (hGSTP1) selectively among various cytosolic GSTs.
M9850	ABDP 493/503	ABDP 493/503 (same as BODIPY 493/503) is a lipophilic fluorescent probe that localizes to polar lipids and can be used to label cellular neutral lipid contents, particularly those localized to lipid droplets, in live and fixed cells.
M6327	2-NBDG	2-NBDG is a fluorescently-labeled deoxyglucose analog that is used primarily to directly monitor glucose uptake by living cells and tissues. 2-NBDG can be used in real-time confocal, high-resolution, or wide-field fluorescence microscopy as well as in flow cytometry. The probe can be excited by the Argon laser at 488 nm to give the environment-sensitive fluorescence.
M40799	1,3-Diphenylisobenzofuran	1,3-Diphenylisobenzofuran is a selective fluorescent probe that reacts highly specifically with a number of reactive oxygen species (e.g., singlet oxygen and hydroxyl, alkyl oxygen, or alkyl peroxy radicals), and can be used for the quantitative detection of hydrogen peroxide in samples containing different reactive nitrogen and oxygen species (RNOS), (λex=495 nm, λem=523 nm).
M40798	Sulfo-NHS-LC-Biotin sodium	Sulfo-NHS-LC-Biotin sodium can label antibodies by amine reaction.
M40781	Phenol Red	Phenol Red is a pH indicator dye that shows a distinct color change from pink to yellow in the event of a positive reaction.
M40780	Ethidium bromide	Ethidium bromide is an embedded dye used for fluorescent labeling (nucleic acid staining) in molecular biology laboratory science, such as agarose gel electrophoresis. Ethidium bromide intercalates double-stranded DNA and RNA and acts as a frameshift mutagen. It can also be used in conjunction with acridine orange to differentiate between viable, apoptotic and necrotic cells.
M40744	Rhodamine 101 chloride	Rhodamine 101 chloride is a fluorescent dye with excitation and emission wavelength maxima of 565 nM and 595 nM, respectively.
M40634	Z-ARG-LEU-ARG-GLY-GLY-AMC acetate salt	Z-ARG-LEU-ARG-GLY-GLY-AMC acetate salt is a fluorescent peptide substrate that can be used to determine the activity of UCH-L3 and USP-5.
M40575	Cyanine5 azide chloride	Cyanine5 azide chloride is a potent fluorescent dye that reacts with terminal alkynes via a copper-catalyzed click reaction (CuAAC).The reaction is carried out by a copper-catalyzed click reaction (λex=646 nm, λem=662 nm). (λex=646 nm, λem=662 nm).
M40550	Pararosaniline hydrochloride	Pararosaniline hydrochloride is a pH-sensitive alkaline dye that can be used to track specific proteins, analyze SO2 and formaldehyde, and stain bacteria or other organisms.
M40541	4-Methylumbelliferyl oleate	4-Methylumbelliferyl oleate is a fluorescent substrate for acidic and alkaline lipases. It is cleaved by lipases and releases 4-Methylumbelliferyl (Ex/Em=320/450 nm).
M40496	CellTracker Blue CMAC	CellTracker Blue CMAC is a novel thiol-sensitive dye that is also a glutathione-sensitive probe and is able to stably attach and track cells for long periods of time (λex=372 nm, λem=470 nm).
M39668	AQC	AQC (6-Aminoquinolyl-N-hydroxysccinimidyl carbamate) is a reagent used for amino acid or protein sequence analysis by HPLC with fluorescence detection. AQC reacts with primary and secondary amino acids to yield fluorescent derivates, allowing amino acid detection at under-picomolar levels.
M39667	Carmine	Carmine (Carmine red), a natural red dye extracted from the dried females of the insect Dactylopius coccus var. Costa (cochineal). Carmine is a widely used food additive. Carmine provokes both an immediate hypersensitivity and a delayed systemic response with cutaneous expression.
M39665	Sudan IV	Sudan IV is a lysochrome (fat-soluble dye) diazo dye used for the staining of lipids, triglycerides and lipoproteins on frozen paraffin sections.
M39656	Leucomalachite green	Leucomalachite green is a triphenylmethane dye used to detect blood. Leucomalachite green, a major metabolite of malachite green, is a potential carcinogen, teratogen and mutagen.
M31381	Rhod-4, AM	Rhod-4, AM is a calcium ion fluorescent probe (λex=523 nm, λem=551 nm).
M31330	Cy5.5-SE	Cy5.5-SE (Cyanine5.5 NHS ester) is a phalloidin dye used for labeling biomolecules such as peptides, proteins, and oligomers and for in vivo imaging of animals.
M31328	CY5.5-COOH	CY5.5-COOH is a fluorescent dye molecule commonly used for labeling and detection of biomolecules, including cell imaging, protein localization, and immunostaining. The presence of the carboxyl functional group allows CY5.5 to be attached to other compounds for specific binding and detection of different biomolecules.
M31326	Cyanine5 NHS ester chloride	Cyanine5 NHS ester chloride is a red fluorescent dye that can be used to label amino groups in peptides, proteins and oligonucleotides.
M31323	Cyanine5 carboxylic acid chloride	Cyanine5 carboxylic acid chloride is a commonly used fluorescent dye with an emission wavelength around 650 nm that can be used to label proteins.
M31320	Cy3 NHS ester	Cy3 NHS ester is a fluorescent dye of the Cyanine family of dyes that emits an orange-red to red fluorescent signal at an excitation wavelength of about 550 nm, which can be used for protein labeling, cellular imaging and molecular tracking applications.

By Signaling Pathways

By Product Type

Signaling Pathways

Fluorescent Dye

Get to Know Us

Customer Support

Resources

Contact Us