Fluorescent Dye

Cat.No.	Name	Information
M5708	Iohexol	Iohexol is a contrast agent which can be applied for myelography, computerized tomography (cisternography, ventriculography) and MicroCT imaging in vivo.
M5118	Nile Red	Nile Red is a strongly fluorescent stain in the presence of a hydrophobic environment for the detection of intracellular lipid droplets. Nile red exhibits strong fluorescence in non-polar environments, while its fluorescence is weaker in hydrophilic polar environments. Nile red is commonly employed as a specific fluorescent dye for lipids and lipid droplets. The fluorescence excitation and emission wavelengths of Nile red are 559/635 nm respectively.
M5106	DAPI dihydrochloride	DAPI dihydrochloride is A fluorescent dye that binds DNA rich in a-T sequences. The maximum excitation/emission wavelength is 358nm/461 nm, and the blue fluorescence is often used to observe the nucleus and nucleic acid. Store at room temperature away from light.
M9096	H2DCFDA	H2DCFDA is a cell-permeable probe used to detect intracellular reactive oxygen species (ROS) (Ex/Em=488/525 nm). H2DCFDA can be used for the Bacterial reactive oxygen species (ROS) production assay.
M9724	JC-1	Jc-1 (Mitochondrial membrane potential probe) is a fluorescent lipophilic carbonyl cyanine dye used to measure mitochondrial membrane potential. The maximum excitation/emission wavelength is 515nm/529nm (590nm), and green fluorescence is emitted. Used to observe mitochondria, stored at room temperature, away from light.
M8873	D-Luciferin potassium salt (Ultra pure)	D-Luciferin potassium salt is the natural specific substrate for firefly luciferase (FLuc) and one of the most commonly used dyes in bioluminescence and in vivo imaging experiments. D-Luciferin potassium salt is catalysed by FLuc into luciferin in the presence of ATP, magnesium ions, and oxygen, emitting fluorescence with a peak wavelength of approximately 560 nm. In experiments, by integrating the FLuc gene as a reporter element into target cells (such as tumour cells, stem cells, or pathogenic microorganisms) or transgenic animals, followed by intraperitoneal or intravenous injection of D-luciferin potassium salt, real-time, non-invasive tracking and quantitative analysis of these targets can be achieved using imaging equipment.
M5114	Calcein-AM	Calcein-am is a fluorescent dye that penetrates cells and is used to measure cell viability. The excitation and emission wavelengths of Calcein are 494 nm and 517 nm, respectively. Fluorescent green. Store at -20℃ away from light.
M5115	Fluorescein diacetate	Fluorescein diacetate (FDA), a fluorescent probe used for vital staining, is a fluorescently activated by esterolytic activity of human Pi-class glutathione S-transferase (hGSTP1) selectively among various cytosolic GSTs.
M9850	ABDP 493/503	ABDP 493/503 (same as BODIPY 493/503) is a lipophilic fluorescent probe that localizes to polar lipids and can be used to label cellular neutral lipid contents, particularly those localized to lipid droplets, in live and fixed cells.
M6327	2-NBDG	2-NBDG is a fluorescently-labeled deoxyglucose analog that is used primarily to directly monitor glucose uptake by living cells and tissues. 2-NBDG can be used in real-time confocal, high-resolution, or wide-field fluorescence microscopy as well as in flow cytometry. The probe can be excited by the Argon laser at 488 nm to give the environment-sensitive fluorescence.
M39654	7-Amino-4-methylcoumarin-3-acetic acid	7-Amino-4-methylcoumarin-3-acetic acid is a fluorescent protein labelling agent. 7-Amino-4-methylcoumarin-3-acetic acid emits in the blue region (440-460 nm) on activation with UV light (350 nm).
M31332	Cyanine7.5 maleimide	Cyanine7.5 maleimide (CY7.5-maleimide) is a commonly used phalloidin dye, and its labeled product has an Ex/Em of 788/808 nm, respectively.
M31331	Cy5.5 NHS ester (non-sulfonated)	Cy5.5 NHS ester (non-sulfonated) is a commonly used dye for labeling biomolecules such as peptides, proteins, and oligomers and for in vivo imaging of animals.
M31327	Cyanine5 carboxylic acid	Cyanine5 carboxylic acid is an inactive dye containing a 5-cyanofluorophore that can be used for control samples and instrument calibration.
M31325	Lipo CY5(Et) acid	Lipo CY5(Et) acid is a fluorescent dye.
M31324	Cy5 DiSE(Di SO3)	Cy5 DiSE (Di SO3) is a commonly used fluorescent dye.
M31322	Cy3.5	Cy3.5 (Cyanine 3.5) is a red fluorescent anthocyanin fluorescent dye. It can be used to label proteins, antibodies, peptides, nucleic acid molecules and nanoparticles.
M31321	CY3-SE	CY3-SE (CY3 NHS ESTER) is a near-infrared fluorescent labeling dye that can be used to label biomolecules such as peptides, proteins and oligomers.
M31319	CY2-SE	CY2-SE (Cyanine2 Succinimidyl Ester) is a dye for labeling amino groups of peptides, proteins, and oligonucleotides (λex=492 nm, λem=510 nm).
M31257	SBFI tetraammonium	SBFI (tetraammonium), the tetraammonium salt of SBFI, is a sodium fluorescence indicator. SBFI (tetraammonium) is sodium-sensitive dye. The excitation wavelength is set 333 nm, and the emission wavelength is 539 nm for SBFI.
M31067	CH1055 triethylamine	CH1055 triethylamine is a NIR-II fluorophore based on a synthetic 970-Da organic molecule. CH1055 triethylamine is a rapidly excreted dye (∼90% excreted through the kidneys within 24 h). CH1055 triethylamine also allows targeted molecular imaging of tumors in vivo when conjugated with anti-EGFR Affibody.
M30869	EC-17 disodium salt	EC-17 (disodium salt) is a folate receptor alpha (FRα) targeting contrast agent with fluorescent properties in the visible light spectrum. The peak excitation and emission wavelengths of EC-17 are 470/520 nm.
M30284	Resazurin	Resazurin (Diazoresorcinol) is a water-soluble, non-toxic, stable, membrane-permeable blue non-fluorescent dye (faintly fluorescent). Resazurin is used as a redox indicator, can be reduced to pink, highly fluorescent Resorufin (Ex=530-560 nm, Em=590 nm) in living cells. Resazurin can be used for the detection of cell viability, toxicity, proliferation, migration and invasion in cells (human, plant and animal, bacterial and fungal).
M30223	WST-3	WST-3 is a water-soluble tetrazolium dye. In the presence of an electron mediator, WST-3 is reduced to WST-3 formazan by NADH and displays an absorption maxima of 433 nM.
M29571	HM Janelia Fluor 526, SE	HM Janelia Fluor 526, SE (HM-JF526 NHS) is a derivative of hydroxymethyl JF526 (HM-JF526). SMLM (single-molecule localization microscopy) imaging in standard phosphate-buffered saline (pH 7.4) revealed that the HM-JF526 label showed spontaneous blinking behavior throughout the imaging session and did not require short-wavelength activation light.
M29524	8pyDTZ	8pyDTZ is a pyridyl diphenylterazine (DTZ) analog and an ATP-independent pyridyl substrate of LumiLuc luciferase. 8pyDTZ exhibits spectrally shifted emission. 8pyDTZ has excellent biocompatibility and superior in vivo sensitivity. 8pyDTZ can be used for in vivo luminescence imaging.
M29478	Bevonescein	Bevonescein (ALM-488) is a fluorescently-labeled peptide that specifically binds to the human neurons or human nerves. Bevonescein can be used as a diagnostic imaging agent.
M29450	NADA-green	NADA-green is a fluorescent D-amino acid probe. NADA-green is efficiently incorporated into the peptidoglycan of diverse bacterial species peptidoglycan biosynthesis. NADA-green allows probing of bacterial growth with minimal perturbation.
M29404	Hydroxystilbamidine bis(fluoroGlod)	Hydroxystilbamidine bis(methanesulfonate), a dye capable of binding to both DNA and RNA, has been found to be a powerful inhibitor of cellular ribonucleases.
M29334	BDP 630/650 carboxylic acid	BDP 630/650 carboxylic acid is a bright far-red fluorophore based on a borondipyrromethene scaffold. BDP 630/650 carboxylic acid is a BDP linker containing carboxylic acid. BDP 630/650 carboxylic acid can react with primary amine groups to form a stable amide bond. (λex=630 nm, λem=650 nm).

By Signaling Pathways

By Product Type

Signaling Pathways

Fluorescent Dye

Get to Know Us

Customer Support

Resources

Contact Us